solenoid control valve

solenoid control valveBACK TO LIST

•Solenoid control valve is a kind of isolation valve, which can substitute traditional gate valves, ball valves and butterfly valves. The gate functioning is easily controlled by electrical power. The valve can be installed in fire control facility, water supply, or distant location where it's difficult to control the gate opening. The controller is directly fixed and can be easily installed on piping site. Interchangeable between manual and solenoid control.

. Specification of solenoid control switch

 Working voltage: DC12V,DC24V,AC110V,AC220V

 Electrifying time range: 1 year continuously for 10000 hours

 Allowable Voltage range: + - 10%

 Applied temperatue : -15-80 degree C

 Durability : 500000 cycles

 Applied pressure range : 0.3-10 kgf/cm2

 Generally Normal open type

 

【Attention】-solenoid control valve
  • The working pressure should be greater than 0.3 kgf/cm2, please check the pressure before installation.
  • Please remove impurities or metal dusts inside the pipe thoroughly. If possible, please add filter to prevent pipe blocking.
  • Avoid upside-down installation under insufficient flow. (Valve’s inlet should face up)